|
|
|
|
 |
 |
|
|
|
|
|
Caractéristiques :
PRESENTATION
Le mini barbone shuttle SN27P2 va vous permettre de monter des configurations sur processeur AMD au socket AM2.
Muni du nouveau châssis de type P2 le SN27P2 dispose d'un chipset de type NVIDIA nForce 570 Ultra. D'une grande polyvalence, vous pourrez l'utiliser pour tous types d'applications que ce soit les jeux, applications multimédia ou travaux bureautiques standards.
Avec une alimentation ultra silencieuse, un système de ventilation avancé, un slot PCIExpress x16, des interfaces SATA-II et un port Firwire, le mini barbone est un outil d'exception.
POINTS FORTS
- Châssis de type P2
- Chipset NVIDIA nForce 570 Ultra MCP
- Alimentation SilentX 400 Watt
- Support AMD socket AM2
- Système de ventilation Shuttle I.C.E.
- Slot mémoire Dual Channel DDRII
- Slot PCIExpress x16
- Port Firewire
CARACTERISTIQUES TECHNIQUES
Châssis
- P2-type aluminum chassis, color: black
- storage bays: 1 x 5.25", 3 x 3.5" (2 hidden)
stealthed drive doors
- Power and Reset buttons at the front and Clear CMOS button at the backpanel
- dimensions: 32.5 x 22 x 21 cm (LWH)
Mainboard
- Shuttle FN27, Shuttle form factor, proprietary design for SN27P2
- chipset: NVIDIA nForce 570 Ultra MCP (Codename: MCP55-Ultra)
- Dimensions: 20.5 x 28 cm
Power supply unit
- SilentX 400 Watt mini PSU with switch, supports 100~240 VAC, PFC
- connectors: ATX Main Power and 12V Power
- EMI Certified: CE, FCC, C-Tick, BSMI
- Safety Certified: UL, TÜV, CB, BSMI
Processor support
- Socket AM2 supports
- AMD Athlon™ 64, Athlon™ 64 FX, Athlon™ 64 X2 and Sempron
- Single- and Dual-Core processors (Rev. F) with DDR2 interface
- 1 GHz system bus with 2000MT/s Hyper-Transport link
Processor cooling system
- Shuttle I.C.E. (Integrated Cooling Engine)
advanced Heatpipe technology
three cooling zones, linear fan control, 4-pin fan connector
Power Management
- compatible with ACPI Revision 2.0 and PCI PMI 1.1
- Power On Suspend (POS) or ACPI S1 support
- Supend to RAM (STR) or ACPI S3 support
- Suspend to Disk (STD) or ACPI S4/S5 support
- Supports C0, C1, C2 and C3 states
Memory support
- 4 x 240 pin slots supports DDR2-800/667 memory modules
- max. 2 GB per DIMM up to a total size of 8 GB
- Dual Channel memory controller, supports unbuffered RAM
Expansion slots
- 1x PCI-Express 16X, supports Dual-Slot graphics cards
1x PCI (32 Bit)
8-channel Audio
- 7.1 + 2 HD channel Audio Codec (Realtek ALC882)
- High-performance 103dB playback SNR quality
- Playback sampling rates up to 192 kHz
- Analog: line-out (8-ch), line-in, microphone, CD-in, AUX
- Digital: optical SPDIF-in/out, coaxial SPDIF-out
Gigabit LAN controller
- Integrated Gigabit Ethernet network controller with Marvell® 88E1116 PHY
- With NVIDIA Hardware Firewall (supports IPv4 and IPv6)
- Supports 10 / 100 / 1.000 MBit/s opteration
- Supports power saving mode
Firewire controller
- IEEE1394 Firewire controller VIA VT6307
- With 2 Firewire connectors (front and rear)
- Supports 400Mb/s, 200Mb/s, 100Mb/s data transfer rate
- Compliant with 1394 OHCI specification revision 1.0
Drive connectors
- 4 x Serial-ATA 3Gb/s (300 MB/s, 3 GBit/s)
- 3 internal and 1 external port connectors
- Supports MediaShield™ RAID with support for Raid 0, 1, 0+1, 5 and JBOD
- Supports Native Command Queuing (NCQ) and Tagged Command Queuing (TCQ)
- 1 x IDE ATA 133 drives
- 1 x floppy disk drive
Front-panel I/O
- Microphone
- Headphone (Line-out)
- 2x USB 2.0
- IEEE1394a Firewire (Mini port, 4 pol.)
- Power and Reset buttons
Back-panel I/O
- 6x USB 2.0
- IEEE1394a Firewire (6 pin)
- Serial-ATA 3 GBit/s (eSATA connector for external storage device)
- Gigabit LAN (RJ45)
- 8-ch Audio line-out (2x rear/front, bass/center, surround/back)
- Line-in
- SPDIF: optical in/out, coaxial out
CMOS button
Other onboard connectors
- 2 x USB 2.0, 1x5 pins each (total 10x)
- 1 x AUX audio in
- 4 x fan connectors (4 pins each)
Accessories
- Multilanguage XPC User Guide
- XPC driver CDROMs for 32bit and 64bit operating system
- Shuttle Extras CDROM (Software)
- RAID Installation Guide and RAID driver floppy disk
I.C.E. Technology CPU heat-pipe
- Cables for FDD, IDE ATA133, Serial-ATA
- Power cord
- Screws pack and heatsink compound
Réf. const : PC -SN27P2
Poids : 5 Kg
Conditionnement : 2 pcs |
|
* Photos non contractuelles |
Code :
SHUBT007907
|
|
 |
|
|
 |
|
|
 |
|
Votre E-mail :
|
|
|
